-
Frigid-X™ Adjustable Spot Coolers
The Frigid-X™ Adjustable Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30 ºF to room temperature and can be easily set with a thermometer.
The Frigid-X™ Adjustable Spot Cooler System comes with three brass generators for flow rate adjustment – 15 scfm (425 slpm), 25 scfm (708 slpm) and 30 scfm (850 slpm) providing refrigeration up to 2100 Btu/hr (615 Watts).
-
Frigid-X™ Mini Spot Coolers 56008F
56008F
New product
Cool small parts and tooling with a compact spot cooler with no moving parts.
The Frigid-X™ Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact.
Designed for small parts, the Frigid-X™ Mini Spot Cooler produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending in inlet air temperature. It can improve tolerances in machining of small critical parts and increase production rates.
Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the mini spot cooler.
-
Frigid-X Tool Cooling Systems 56015F
56015F
New product
Frigid-X™ Single Point Tool Cooling System for dry machining applications – replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.
It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.
Produces cold air at approximately 50º F (28º C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.
-
Frigid-X™ Sub-Zero Vortex™ Tool Cooling Mist Systems 58208
58208
New product
When lubrication is required as well as cooling, lubricating mist can be reduced and cooling enhanced.
Heavy coolant can be messy, costly and must be carefully maintained. In addition, dry machining is not always possible due to the need for lubrication or additional cooling that cold air alone cannot provide. The unique patent pending low cost Frigid-X™ Sub-Zero Vortex™ Tool Cooling Mist System is ideal for such applications. The unit is comprised of a coolant/lubricant suction system which draws any water based liquid into a specially designed delivery system. This cools the liquid to deliver a very cold fluid “mist” at around 40 degrees F (5 degrees C). This cooling allows for as much as 20 % less coolant needed, faster production rates and improved quality.
Sub Zero Vortex™ Mist Tool Cooling System comes with Mist Handing unit, Mini Cooler, Magnet.
-
Nex Flow™ Cabinet Panel Cooler 60004A
60004A
New product
NEMA 12 Cabinet Panel Cooler for electronic control panels for general use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.
The NEMA 12 Cabinet Panel Cooler provides a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air
Unlike many of our competitors all of our Frigid-X™ NEMA 12 Cabinet Panel Coolers are stainless steel, not just the vortex tube, for longer life and flexible use. Frigid-X™ NEMA 12 Cabinet Panel Cooler is compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
-
Nex Flow™ Cabinet Panel Cooler 60010A
60010A
New product
NEMA 12 Cabinet Panel Cooler for electronic control panels for general use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.
The NEMA 12 Cabinet Panel Cooler provides a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air
Unlike many of our competitors all of our Frigid-X™ NEMA 12 Cabinet Panel Coolers are stainless steel, not just the vortex tube, for longer life and flexible use. Frigid-X™ NEMA 12 Cabinet Panel Cooler is compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
-
Model 47001
Model 47001 Air Nozzles– is a small brass nozzle to fit into small spots and used by many machine builders for blow-off applications.
Micro Air Nozzle – The Model 49001 Nex Flow™ brass nozzle is a Micro Air Nozzle for blowoff.
-
Model 47002
Model 47002 Air Nozzles – is the brass nozzle added to a copper tube.
Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customer’s system.
-
Model 47003
Model 47003 (anodized aluminium) Model 47003S (303/304 Stainless Steel) and Model 47003S-316L (316L Stainless Steel) Air Nozzles – This is a common standard strength nozzle with a 1/8” male NPT connection and ideal for most blow-off applications involving liquids.
